Appendix I: Triad Ii Operation - DENTSPLY Triad 2000 Manual De Instrucciones

TRIAD II owners should follow operating proce-
dures and material curing times given for the TRIAD
2000 unit, and use the following sightline instruc-
tions specific to the TRIAD II Curing Unit.
USING THE TRIAD II 'SIGHTLINE'
To insure optimum processing cycles in the
TRIAD II Unit, the turntable should be positioned to
align the lowest point of the TRIAD VLC Material
being used to 1/4''(6.3 mm) below the metal-tab,
white sightlines located on either side of the
turntable.
12

APPENDIX I: TRIAD II OPERATION

Use the height adjustment control knobs on either
side of the TRIAD II Curing Unit to align material
within the chamber. See the following illustration.