What's In The Box - Pioneer S-DV424 Guia De Instalacion

S-DV424/740 Speaker Setup guide

What's in the box

• Front speakers x 2
• Center speaker x 1
• Surround speakers x 2
• Subwoofer x 1
• Speaker cords:
Red/White (Front speakers) 5m x 2
Green (Center speaker) 5m x 1
Blue/Grey (Surround speakers) 10m x 2
Purple (Subwoofer) x 1
• Non-slip pads (small) x 20
• Non-slip pads (large) x 9
• Subwoofer stands x 3
• Adhesive strips x 4
Using the subwoofer stands
Use the subwoofer stands to secure the base of the subwoofer
when placing it in an upright position, or to provide support
when laying it flat on its side. When the subwoofer is on its side,
make sure the speaker is face-down.
Upright position
Safety precautions when setting up
When assembling the speakers, lay them down flat on their side to avoid accidents or injury. Make sure to use a
stable surface when assembling, setting up, and placing the speakers.
Assembling the speaker stands and securing your front speakers
1
Attach the speaker stand bases to the stems using the screws provided.
Using four small screws for each speaker stand, secure the base to the stem as shown in the illustrations below.
Make sure the Pioneer logo on the stem is facing forward, and the outlet on the base (for the speaker cord) is
towards the back.
2
En
• Front speaker stand bases x 2
• Front speaker stand stems x 2
Flat position
Pioneer logo
Speaker cord outlet
• Front speaker covers x 2
• Surround speaker bases x 2
• Small screws x 8
• Large screws x 4
When using the stands to lay the subwoofer
on its side, stick the supplied non-slip pads
on the stands where indicated below.
Once you have
aligned the stem
and base, secure
with the small
screws at the
points shown at
left.