Safety; Troubleshooting - Robot Coupe J80 Ultra Manual De Instruccion

• ELECTRICAL DATA
J 80 Ultra
Speed
Motor
(rpm)
120V / 60Hz 3450
J 100 Ultra
Speed
Motor
(rpm)
120V / 60Hz 3400
• The J 80 Ultra/J 100 Ultra juicer will not start
unless the lid has been correctly positioned and
the safety arm properly locked into place. The
motor will switch itself off as soon as you open the
safety arm or press the Off button (red button).
• The J 80 Ultra/J 100 Ultra juicer is equipped with
a powerful electric brake which will shut the
machine down in less than 2 seconds if you open
the safety arm while the juicer is running.
• To switch your juicer back on, simply fold the
safety arm back over the lid and press the On
button (green button).
• The J 100 Ultra is fitted with a thermal protection
system which automatically switches the motor off
if it remains overloaded for any length of time.
If this happens, wait for the appliance to cool
down before resetting the thermal protection
(button on underside of the appliance).
14
WARNING
•
ther the pulp container or the continuous ejection
chute (for the J 100 Ultra).
Power Intensity • Always switch the machine off before removing
(Watts) (Amp.)
the pulp container or the continuous pulp ejection
chute (for the J 100 Ultra).
700 9
• Never insert your hand or any object other than
the pusher into the ejector if the machine is plug-
ged in or the basket is rotating.
Power Intensity
• Never unplug the appliance by tugging on the
(Watts) (Amp.)
power cord or with damp hands.
850 9

SAFETY

• Never try to override the locking or safety
systems.
• Never introduce anything other
than fruit or vegetables into
the feed tube.
• The lid of your appliance
features a unique patented Auto
Feed system. Simply introduce the food into
the feed tube and let the machine do the rest.
• Should a blockage occur inside the feed tube,
NEVER USE any object other than the pusher to
clear it. Another solution is to switch the
machine off and remove the food causing the
problem inside the tube.
• Never use your hand to push the food down
into the feed tube.
• Never insert your hand or any object other
than the pusher into the ejector if the machine
is running or the basket rotating.
: never use the appliance without ei-
R E M E M B E R

TROUBLESHOOTING

SYMPTOMS CAUSES AND/OR REMEDIES
The machine will not - Check the fuses in your mains
start supply.
- Close the safety arm properly
J 100 Ultra :
- Check that the thermal protection
(button on underside) has been
reset.
Abnormal noise - The appliance has been incorrectly
assembled.
See "Assembly" chapter.
- One of the parts is faulty and
needs replacing.
Inefficient grating - The grating disc is worn.
Replace the grating disc inside
the basket.
- There is a blockage in the feed
tube which needs to be cleared.
The appliance vibrates - The pulp container is full or the
basket is out of balance due to an
accumulation of pulp on the filter.
- If the vibration is permanent,
check that the basket has not
been damaged in some way.
The basket does not - Have the appliance checked by a
stop immediately when qualified person.
the safety arm is
opened.
It takes more than 2
seconds to stop.
IMPORTANT :
For all repairs and maintenance, it is
vital to use parts supplied by Robot-Coupe.