Nolan N104EVO Seguridad E Instrucciones página 7

In such cases, after using the helmet and to restore the system efficiency, remove the inner visor from the helmet visor and let it dry
with dry and lukewarm air. The same procedure must be applied to the helmet, in order to dry out humidity in case it has formed up
as a consequence of the conditions described above.
2 PINLOCK ® INNER VISOR DISASSEMBLY
2.1 Remove the visor equipped with Pinlock
2.2 Widen the visor and release the Pinlock
2.3 Release the visor.
MAINTENANCE AND CLEANING
Remove the Pinlock ® inner visor from the visor. Using a damp and soft cloth, gently clean it with neutral liquid soap. Remove the
soap under running water.
Dry the inner visor with dry and lukewarm air without wiping it.
To keep the features of the inner visor in good conditions over time, let the helmet dry in a ventilated and dry place with the visor
open after use.
Keep it away from heat sources and store it in a place away from direct light.
Do not use solvents or chemical products.
• VISION PROTECTION SYSTEM (VPS)
The new and exclusive inner Vision Protection System (VPS) is a
ant treatment.
Using it is very simple and practical: Just lower it to activate it or lift it to remove it from the field of vision. It is useful in all sorts of
situations, both on long journeys out of town and shorter town trips.
Moreover, the fastening system allows you to assemble and disassemble the sun screen without any tools to allow ordinary main-
tenance and cleaning operations.
VPS OPERATION
The VPS mechanism allows activating the sun screen easily and without operating on the visor, by simply lowering it until it partial-
ly covers the visor field of vision. In this way, the desired light transmittance reduction is achieved. At any time, without operating the
visor, the VPS can be deactivated with a simple movement and easily pulled up to restore the normal conditions of visibility and pro-
tection guaranteed by the approved helmet visor.
To activate the VPS, push the slider forward (Fig. 8 B) until you hear the click, which means the slider and VPS are correctly in place.
To deactivate the VPS push the recovery button (Fig. 8 A) until the VPS unlocks and moves automatically in standby position.
In such cases, after using the helmet and to restore the system efficiency, remove the inner visor from the helmet visor and let it dry
with dry and lukewarm air. The same procedure must be applied to the helmet, in order to dry out humidity in case it has formed up
as a consequence of the conditions described above.
2 PINLOCK ® INNER VISOR DISASSEMBLY
2.1 Remove the visor equipped with Pinlock
2.2 Widen the visor and release the Pinlock
2.3 Release the visor.
MAINTENANCE AND CLEANING
Remove the Pinlock ® inner visor from the visor. Using a damp and soft cloth, gently clean it with neutral liquid soap. Remove the
soap under running water.
Dry the inner visor with dry and lukewarm air without wiping it.
To keep the features of the inner visor in good conditions over time, let the helmet dry in a ventilated and dry place with the visor
open after use.
Keep it away from heat sources and store it in a place away from direct light.
Do not use solvents or chemical products.
• VISION PROTECTION SYSTEM (VPS)
The new and exclusive inner Vision Protection System (VPS) is a
ant treatment.
Using it is very simple and practical: Just lower it to activate it or lift it to remove it from the field of vision. It is useful in all sorts of
situations, both on long journeys out of town and shorter town trips.
Moreover, the fastening system allows you to assemble and disassemble the sun screen without any tools to allow ordinary main-
tenance and cleaning operations.
VPS OPERATION
The VPS mechanism allows activating the sun screen easily and without operating on the visor, by simply lowering it until it partial-
ly covers the visor field of vision. In this way, the desired light transmittance reduction is achieved. At any time, without operating the
visor, the VPS can be deactivated with a simple movement and easily pulled up to restore the normal conditions of visibility and pro-
tection guaranteed by the approved helmet visor.
To activate the VPS, push the slider forward (Fig. 8 B) until you hear the click, which means the slider and VPS are correctly in place.
To deactivate the VPS push the recovery button (Fig. 8 A) until the VPS unlocks and moves automatically in standby position.
® inner visor.
® inner visor from the pins (Fig. 6).
7
® inner visor.
® inner visor from the pins (Fig. 6).
7
®
- moulded sun screen with scratch-resistant and fog-resist-
®
- moulded sun screen with scratch-resistant and fog-resist-