Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Bagger Usage
NOTE: When both grass bags are full,
place the tractor on a firm, level surface,
disengage the PTO, turn the tractor engine
off and set the parking brake.
Open the grass catcher hood by pushing
in on the rear, right-side tab with your right
hand, as seen in 1 of Figure 5-1, and lifting
the cover with your left hand in the center
rear of the bagger cover, as seen in 2.
Figure 5-1
1.
Do not remove the chute tube
assembly from the tractor.
2.
Remove the grass bags by lifting
these up (1) and moving the bags
away from the bag support assembly
(2). See Figure 5-2.
1
Figure 5-2
3.
Empty the grass clippings at a proper
disposal site, use the handle at the
bottom of each grass bag. Holding
the bag firmly, empty the contents
4.
Replace grass bags, close lid, flip
down seat, restart your tractor,
release parking brake and resume
cutting your grass.
5
11
Publicidad
Tabla de contenido
