Product Specifications - Blue Hawk FLUX-MIG 100 Manual Del Usuario

WARNING
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN
SERIOUS INJURY AND PROPERTY DAMAGE OR DEATH. READ AND UNDERSTAND ALL
WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS PRODUCT.
WHENEVER USING TOOLS, BASIC SAFTEY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF PERSONAL INJURY.
SOME DUST CREATED BY PAINT SPRAYING, POWER SANDING, SAWING, GRINDING,
DRILLING, AND OTHER RELATED ACTIVITIES IS KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER, BIRTH DEFECTS, AND OTHER REPRODUCTIVE HARM. A LISTING
OF CHEMICALS CAN BE OBTAINED FROM www.oehha.ca.gov UNDER PROPOSITION 65.
SOME EXAMPLES OF THESE CHEMICALS ARE:
• LEAD FROM LEAD BASED PAINTS
• CRYSTALLINE SILICA FROM BRICKS, CEMENT AND OTHER MASONRY PRODUCTS
• ARSENIC AND CHROMIUM FROM CHEMICALLY TREATED LUMBER
YOUR RISK FROM THESE EXPOSURES VARIES, DEPENDING ON HOW OFTEN YOU DO
THIS TYPE OF WORK. TO REDUCE YOUR EXPOSURE TO THESE CHEMICALS WORK IN
A WELL VENTILATED AREA AND WORK WITH APPROVED SAFTEY EQUIPMENT, SUCH
AS SUCH AS A RESPIRATOR OR DUST MASKS WHICH ARE SPECIALLY DESIGNED TO
FILTER MICROSOPIC PARTICLES.

PRODUCT SPECIFICATIONS

Welding Current
Duty Cycle
Input Power
Open Circuit Voltage (max)
Thermal Overload Protection with Light Automatic shutdown and restart after cool down
Wire Size
Cable Sizes
Welding Capacity
Wire Spool Size
35 ~ 88 amps
30% at 70 amps; 45% at 55 amps
120 V AC, 20 amps (max) at 60 Hz
34 V DC
0.025 to 0.030 in. steel and stainless steel;
0.030 to 0.035 in. flux core and aluminum
Power: 16 AWG x 3C x 6 ft.
Ground: 8 AWG, 6 ft. (10mm²)
Gun: 8 AWG, 6 ft. (10mm²)
1 mm to 1/4 in. steel
2 lb. Spool
5
www.lowes.com
®