Specifications; Precautions - Oregon Scientific RA126 Manual Del Usuario

A.
B.
The compass segments now show the angle between your
locked bearing and your current bearing. Therefore, you
need to change the direction you are on to get back onto
your locked bearing course.
To toggle the bearing tracking system to ON / OFF:
• Press MODE to navigate to Set up mode.
• Press SET to navigate to Bearing Tracking System.
• Press ST / SP / + to toggle ON / OFF.
NOTE
The compass sensor should be calibrated before initially
using the bearing tracking system.
1
1. The locked bearing
is 94 and the current
2
bearing is 94.
2. Current compass
bearing.
3
3. Locked compass
bearing.
1
1. Your locked bearing
is 94 and your
2
current bearing is
120.
3
2. Current bearing.
3. Locked bearing.

SPECIFICATIONS

Real time clock
Stopwatch
Thermometer
measuring range
Resolution
Power
Operating temp
Storage temp
Water resistant

PRECAUTIONS

To ensure you use your product correctly and safely, read
these warnings and the entire user manual before using
the product:
• Use a soft, slightly moistened cloth. Do not use abrasive
or corrosive cleaning agents, as these may cause
damage. Use luke warm water and mild soap to clean
the watch and chest belt thoroughly after each training
session. Never use the products in hot water or store
them when wet.
• Do not bend or stretch the transmitter part of the chest
belt.
• Do not subject the product to excessive force, shock,
dust, temperature changes, or humidity. Never expose
the product to direct sunlight for extended periods. Such
10
12/24 hour with hour / minute
/ second
00:00:00 to 59:59:59 (hrs:
min: sec)
-5°C to 50°C
(23°F to 122°F)
0.1°C / 0.2°F
Watch 1 x CR2032 3V battery
-5°C to 50°C
(23°F to 122°F)
-20°C to 60°C
(-4°F to 140°F)
Up to 50 meters (164 feet)
without pressing keys