Sammic SG Serie Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Vacuum is a method of natural food
preservation that consists in removing air
from the pack, eliminating oxygen, the
principal food spoilage agent.
Advantages of vacuum-packing
1-
Maximum
reduction
wastage.
2- Maximum return from labour hours by
making good use of any idle times
occurring within the week in order to
speed up work and to quicken the
process flow in the kitchen.
3- Rational storage of products in cold
rooms:
- Odors will not mix up.
- Products can be labelled, which
facilitates
the
turnover
materials.
- Improvement of inventory control,
since anything to be purchased at a
given time can be determined with
greater accuracy.
4- Exploitation of the best-to-buy days:
- Shopping can be made when prices
are lower.
- Less travels are needed.
5- Less washing-up.
Packing of cured products (sausages,
hams, etc.)
These per se durable products can see their
shelf-life at least doubled when vacuum-
packed. Vacuum-packing also prevents
them from drying up or losing weight,
which would entail an economic loss.
Except for some that are fragile in texture,
these products require no gas injection.
Packing of cooked food
This concerns such food as roast meats,
stews, cannelloni, etc. Once cooked, these
products must be cooled down to the core
from +65ºC
to +10ºC in less than two
hours, in order to prevent microorganisms
from developing.
Vacuum-packing is perhaps the most
practical method of maintaining traditional
cooking with these advantages:
- Easy food processing, without risk of
product spoilage.
- Longer product life.
THE BASICS OF VACUUM-PACKING TECHNOLOGY
Cooking of vacuum-packed food
Put food into a tight and heat-resistant
container. Remove any air from the inside,
seal the container and heat it to cook the
food inside. Cooking is done at low
of
product
temperatures (65ºC to 100ºC), producing a
pasteurising effect. This process has many
advantages. Indeed, among others:
- it maintains the nutritional values.
- It safeguards hygiene, as there is less
handling.
- It reduces weight loss, by preventing
evaporation and drying.
- It allows rational work planning. Food
processing and cooking outside service
hours;
preparation
advance, etc.
of
raw
- It increases the storage time.
Food must be cooled down immediately
after cooking, in order to stop the cooking
process and to prevent the growth of
microorganisms. Cooling is achieved with a
temperature reducer.
Refrigerated foods: Temperature at the
core of the product must descend from
+65ºC to +10ºC in less than 2 hours.
Frozen foods: Temperature at the core of
the product must descend from +65ºC to -
18ºC in less than 4.5 hours..
Thereafter, food is to be kept at a
temperature
refrigerated dishes and of -18ºC if frozen.
When so-packed food is to be prepared to
be savoured, the reconstitution process
must start immediately after taking the
pack out of the fridge or freezer. Basically,
there are three reconstitution techniques:
the low-pressure steam oven, a bain-
marie, and a microwave oven. In the first
two cases, food can be reconstituted within
their packing, while the bag must be
perforated or removed for reconstitution in
a microwave oven, so that steam can
escape without the bag bursting.
Any reconstituted product that is not
consumed may not be stored again.
Refrigerated food should not be stored for
more than 6-21 days.
Gas-packing
The process consists in replacing the air
surrounding food in a bag by a gas mixture
of
banquets
in
of
0ºC
to
3ºC
as
for
in a proportion different to the air quantity,
with a double objective:
- to prolong the life of food without
additives or preservatives, by inhibiting
degradation processes that develop
during storage; and
- to prevent the crushing of products like
salads, bread rolls, etc.
Mainly three gases or their mixtures are
used: O2, CO2 and N2. As a general guide,
it
can
be
assumed
that
(controlled) concentration of CO2 increases
the product life, while a given amount of
N2 prevents the container of quick
metabolising food from breaking and a
small quantity of O2 ensures that some
types of food keep their good condition
and aspect.
It is recommended that specialist gas
manufacturers should be consulted on
what combination of gases is adequate for
a given product.
Freezing of vacuum-packed food.
Conventional freezing techniques allow
keeping the product, but not all of its
qualities. Freezing vacuum-packed food
has many advantages:
- No external frostbiting
- No surface frosting
- No loss of taste or aroma
- No drying
- No oxidation of fats
a
greater
ENGLISH
9

Publicidad

Tabla de contenido
loading

Tabla de contenido