Important Safety Instructions - Swann SWWHD-FLOCAM Guia De Inicio Rapido

IMPORTANT SAFETY INSTRUCTIONS

• All electrical connections and wiring of this product must be carried out by a licensed electrician in
accordance with local and national wiring rules (e.g., AS/NZS 3000 Electrical Installations). Check
with local authorities for applicable requirements.
• The product must be mounted on a flat vertical surface capable of supporting the full weight of the
product.
• Ensure the voltage marked on the product is the same as the electrical power supply to be used.
• Do not connect to a dimmer switch or timer.
• Always turn off electricity at the main circuit breaker or fuse box before installation. Failing to do so
could result in serious injury, electrical shock, and/or risk of fire.
• Do not rely on wall switch alone to turn off the power.
• Do not open or disassemble the product. There are no user-serviceable parts inside.
2
h
Englis
EN