Use And Maintenance; Mode Selection: Roller Or Tilting Mode; Controlling Up, Down, My: In Roller Mode; Controlling Up, Down, My: In Tilting Mode - SOMFY Sonesse 28 WireFree RTS Li-ion Manual De Instrucciones

EN

3. USE AND MAINTENANCE

3.1. MODE SELECTION: ROLLER OR TILTING MODE

The drives are designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the drive to be set according to the type of application.
The drive is set (by default) to work in Roller mode.
1) Move the driven product away from the end limits.
2) Simultaneously press and hold the UP and DOWN buttons
until the driven product briefly moves Up and Down.
3) Press and hold the MY and DOWN buttons simultaneously
until the driven product briefly moves Up and Down to change
from Roller mode to Tilting mode. Green LED blinks twice to
indicate that the motor is in Roller mode or three times to
indicate that the motor is in Tilting mode.

3.2. CONTROLLING UP, DOWN, MY: IN ROLLER MODE

1) To move the driven product from a limit to the other limit,
briefly press the UP or DOWN button.
2) To stop the driven product, briefly press the MY button.
3) (If a my position is recorded) To move the driven product to
the my position, briefly press the MY button.

3.3. CONTROLLING UP, DOWN, MY: IN TILTING MODE

1) To move the driven product from a limit to the other limit,
briefly press (less than 0,5s) the UP or DOWN button.
2) To stop the driven product, press the MY button.
3) (If a my position is recorded) To move the driven product
to the my position, briefly press the MY button. The driven
product will automatically travel to the down end limit (first)
then to the my position.
4) To tilt the slats, press and hold the UP or DOWN button or
use the scroll of the remote control, until the slats reach the
desired position.

3.4. ADJUSTING THE TILTING SPEED

1) To decrease the tilting speed, press and hold the MY and
DOWN buttons simultaneously until the driven product
briefly moves Up and Down. Repeat as needed. The minimum
speed has been reached when the driven product no longer
moves Up and Down and green LED blinks 5 times.
2) To increase the tilting speed, press and hold the STOP
and UP buttons simultaneously until the driven product briefly moves Up and Down. Repeat as
needed. The maximum speed has been reached when the driven product no longer moves Up and
Down and green LED blinks 5 times.
8
Sonesse 28 WireFree RTS / Sonesse ULTRA 30 WireFree RTS
Copyright 2017 - 2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
1
2
3
1
2 3
1
2 3
4
1 2