Greenlee DM-860 Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Description
The Greenlee DM-860 Digital Multimeter is a hand-held testing device with the following
measurement capabilities: AC and DC voltage, AC and DC current, percent of loop current, two
channels of temperature (K-type thermocouples), frequency, duty cycle, resistance, and
capacitance. It also checks diodes and verifies continuity.
The DM-860 warns the user with a beep and an error message on the LCD if the test lead is
plugged into the mA/µA or A input terminal while the selector switch is not in the mA/µA or A
position. The meter features a bar graph display that responds more quickly than the numeric
display—useful for detecting faulty contacts, potentiometer clicks, and signal spikes. An
optical RS-232 computer interface and software facilitates the recording of readings from the
meter to a computer.
Other specialized functions and capabilities include:
• AC bandwidth to 100 kHz for voltage or 10 kHz for current
• MAX/MIN function which stores the maximum, minimum, and difference
• Crest capture mode to capture voltage or current signal peaks
• Selectable between 50,000 or 500,000 counts resolution
• Relative zero mode
• Automatic or manual ranging
• Intelligent automatic power off
• Backlighted LCD for reading in dim conditions
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This
instruction manual and any markings on the tool provide information for avoiding hazards and
unsafe practices related to the use of this tool. Observe all of the safety information provided.
Purpose
This instruction manual is intended to familiarize all personnel with the safe operation and
maintenance procedures for the Greenlee DM-860 Digital Multimeter.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no charge.
Greenlee and
are registered trademarks of Greenlee Textron.
KEEP THIS MANUAL
2

Publicidad

Tabla de contenido
loading

Tabla de contenido