Using The Telephony Function; Connecting A Phone Via Bluetooth; Receiving Contacts; Commands - Parrot CK3000 EVOLUTION Guía De Instalación Rápida

Using the telephony function

Connecting a phone via Bluetooth ®
Prior to using your Parrot CK3000 EVOLUTION with your
phone for the very first time, you must initially pair both
devices.
1. From your phone, search for Bluetooth peripherals. Refer
to your phone user guide for more information.
> The Bluetooth peripherals list is displayed.
2. When the search is complete, select « Parrot EVOL ».
3. Enter « 1234 » when the PIN Code is required.
> You can now connect both devices.

Receiving contacts

To use the Parrot CK3000 EVOLUTION's voice recognition
feature, you must send the contacts from your phone to the
kit via Bluetooth (if your phone supports this feature).
voiceprints» menu.
1. Go to the «Add
2. Press the jog wheel or the green button.
> The Parrot CK3000 EVOLUTION and the phone
disconnect, the kit is now ready to receive contacts.
3. Select the contact on your phone, press Options and
« send by Bluetooth ».
4. Select « Parrot EVOL » from the list (enter 1234 as the
PIN code if prompted by your phone).
> Once received, the kit asks you to record the name
corresponding to the contact. The voiceprint is assigned
to the contact.

Commands

Button
Functions
- Pick up
- Use the voice recognition function
- Long press: call the last dialed number
- Short press during a call: transfer an
ongoing call on the phone (discreet mode)
- Navigate through the menus
- Adjust the communication volume
Short press:
- Enter the menu
- Confirm a selection
Short press during a call: use the DTMF
function (to manage interactive vocal servers)
- Refuse an incoming call
- Hang up
- Exit the menu
7