Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
About This Guide
The WELL Pad Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu
options, and DMX values. Download the User Manual from
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
•
DO NOT open this product. It contains no user-serviceable parts.
•
DO NOT look at the light source when the product is on.
•
Be sure the product is closed completely before inserting into the charging case.
•
Do not operate the product in a sealed enclosure or in an area without air circulation.
•
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
•
CAUTION: This product's housing may be hot when lights are operating.
•
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
•
DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
•
USE a safety cable when mounting this product overhead.
•
DO NOT submerge this product (IP65).
•
DO NOT operate this product if the housing, lenses, or cables appear damaged.
•
DO NOT connect the charging case to a dimmer or rheostat.
•
ONLY connect this product to a grounded and protected circuit.
•
ONLY use the handle to carry this product.
•
In the event of a serious operating problem, stop using immediately.
•
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
•
The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
•
The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico contact your distributor to request
support or return a product. Visit
What is Included
•
4x WELL Pad
•
Charging Case
•
IR Remote
•
4x Diffusion Filters
•
Neutrik® powerCON® power cord
•
Warranty Card
•
Quick Reference Guide
AC Power
The charging case has an auto-ranging power supply that can work with an input voltage range of 100-240 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
Battery Charge Notes
•
Recharge the battery within three days from last use.
•
Recharge the battery to full capacity before storing this product.
•
For best results, charge the battery in a temperature between 32 °F (0 °C) and 95 °F (35 °C).
•
When charging the battery, keep the product at no less than 1 m from any open flame or hot plate.
•
When charging the battery, keep the road case's cover open.
•
Do not charge the battery for more than 24 hours.
•
Perform a full discharge/recharge cycle every three months.
CAUTION: The power button must be in the off position before placing the product in the charging
case.
1
QUICK REFERENCE GUIDE
www.chauvetprofessional.com
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
for contact information.
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
Screw Color
Yellow/Brass
Silver
Green
WELL Pad QRG Rev. 1
Publicidad
Tabla de contenido
