Serial Configuration - C2G 29510 Manual De Instalación

Serial Configuration (UK)
29510/89510 built-in serial interface allows users to transmit RS-232 up to a maximum baud rate of 115,200 bps at bi-directional pass-through. Please
follow the installation and operation steps below.
You will need to use the supplied 6-pin RJ11 extension cable and RJ11 to DB9 adaptor for connecting the transmitter and receiver between the DCE (data
communication equipment) and DTE (data terminal equipment).
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
If there's no serial connector on your computer, you may use
a USB-to-serial adapter for connection. PN. 81632
29
115,200bps
8
None
1
None