Amate Audio KEY Serie Manual Usuario página 11

Amate Audio
Horizontal flying
Vertical Flying
Horizontal flying
Vertical Flying
We offer as optional accessory the ACR M8 eyebolt.
3.7.3. KEY8, KEY10, KEY12 and KEY15 flying with SP35 wall stand
These models may be wall mounted by the SP35 wall stand accessory.
Fig.17. SP35 wall stand
Mounting:
1- Hold the wall stand against the mounting surface, so you can mark the locations of
the mounting holes
2- Drill corresponding pilot holes on the wall and attach the bracket with screws
3- Set the cabinet on the 35mm pole
4- Adjust the cabinet for desired angle
3.7.4. KEY8, KEY10, KEY12 and KEY15 vertical flying with "HR" bar
Use HR8 flying bar for KEY8
Use HR1215 flying bar for KEY10
Use HR1215 flying bar for KEY12
Use HR1215 flying bar for KEY15
KEY Series (Passive). Version 1.1
KEY8
2&5 or 3&6 or 9&10 or 11&12 (front rigging points)
1&4 or 7&8 (back tilt points)
2&3 or 5&6 or 9&11 or 10&12 (front rigging points)
1 or 4 or 7 or 8 (back tilt points)
2&5 or 3&6 or 8&9 or 10&11 (front rigging points)
1&4 (back tilt points)
2&3 or 5&6 or 8&10 or 9&11 (front rigging points)
1 or 4 or 7 (back tilt points)
KEY12
KEY10
KEY15
Jan15 11