Problem Solution - Turbosaver TS-1400B Manual De Usuario

Envasadora comercial
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.
Do not immerse in water or any other liquid.
3.
Avoid using abrasive products or material to clean the unit, for they will scratch the
surface.
4.
Use a mild dishwashing soap and a warm, damp cloth to wipe away food residue or
around components.
5.
Dry thoroughly before using again.
NOTE: The foam gaskets around the vacuum chamber should be dried thoroughly before
re-assembling, when re-assembling, is careful to prevent any damage, and assemble as
original position to ensure no vacuum leaking.
Vacuum Bags
1. Wash bags in warm water with a mild dishwashing soap
2. When wash bags in dishwasher, turn bags inside out and spread them over top rack of
dishwasher, so entire surface is exposed to the washing water.
3. Dry thoroughly before reusing.
IMPORTANT: To avoid possible illness, do not reuse bags after storing raw meats, raw fish
or greasy foods. Do not reuse bags that have been microwaved or boiled.
Accessories
Washing All Vacuum Accessories in Warm Water with a Mild Dishwashing Soap, But Do
not Immerse Cover in Water
1.
Canister bases (not lids) are top rack dishwasher safe. But canister cover should be
wiping down with a damp cloth.
2.
Ensure the accessories to be dry thoroughly before reusing.
3.
Canister and cover is not allowed to use in microwave or freezer.
Storing Your Vacuum Sealer:
1.
Keep the unit in a flat and safe place, out of the reach of children.
2.
Do remember to make sure the lid of appliance is unlocked when not in use and in
storage. Keep the cover locked will distort the foam gaskets causing leaking.

PROBLEM SOLUTION

Vacuuming but seal function is not good
• Check if the edge of the bags has liquid, oil stain or any chippings?
If yes, please clean the edge of bags and try again.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido