Optika Italy B-290 Serie Manual De Instrucciones página 13

5. Fix the rotating part of the junction using the black
wing-nut ①. (Fig. 13)
6. Then hook the Tablet PC onto the 4 screws of the
junction and pull toward down to firmly lock the
Tablet PC in the holder. (Fig. 14)
• To unlock the Tablet PC proceed with the oppo-
site operation: push toward up and remove it from
the holder.
7. Plug one side of the cable named CAMERA CON-
NECTION (USB + OTG) ② to the digital head
and the other side to the Tablet PC. (Fig. 15).
8. Plug the cable named POWER SUPPLY CON-
NECTION to the Tablet PC for battery recharge.
• The Tablet has been set with the Rotation func-
tion disabled: this prevents any flipping of the Live
View in order to get a continuous and as large as
possible view of your slide also when the Tablet is
removed from the holder.
• To enable this function again: you can activate
the Rotation by swiping the screen on his bot-
tom right side and selecting Settings + Screen.
Anyway, it's not suggested to activate the func-
tion when the camera is in Live View mode as it
may give troubles when the camera runs at high
resolutions.
Page 13
①
F ig. 13 F ig. 13
F ig. 14 F ig. 14
②
F ig. 15 F ig. 15