Summary Screen; Save Settings/Exit Program - Brightwell Brightstar II Manual De Instrucciones

P
ROGRAMMING
The summary screen allows you to view which inputs have
been assigned to which pumps.
(Remember an input can be assigned to more than one pump,
and a pump can be made to run on more than one input)
The screen will display the current program number in the top
left corner of the screen, the inputs 1-10 (or 1-6) along the top
and the pumps down the left.
UP DOWN
Use the and
screen. Cursors will indicate which inputs are assigned to
which pumps.
PROGRAM
Use the key to view the summary screen of other
programs (formulas) you may have entered.
If the settings are correct, press the
move to the SAVE SETTINGS screen.
Alternatively:
If the settings are not correct, use the
your steps and amend any settings you wish to change. Or
SEE/JUMP
press the
(see page 24).
P
ROGRAMMING
At the SAVE SETTINGS screen, press the FWD/ACCEPT
to confirm and save all of your programs.
The SETTINGS SAVED message will now appear for a few
seconds while the unit overwrites the previous settings.
The unit will then revert to its operational mode, and display the
default screen.
Note:
If the unit is left in any part of the PROGRAM MODE, with no
keys pressed for 30 mins, it will automatically save the changes
and revert to operational mode.
B L S
RIGHTSTAR AUNDRY YSTEMS
-
S
UMMARY
keys to scroll through the SUMMARY
FWD/ACCEPT
BACK
key to return to the SETTINGS screen
-
S
AVE
S
CREEN
01 I/P1234567890
PUMP 1
PUMP 2
PUMP 3
01 I/P1234567890
PUMP 2
PUMP 3
PUMP 4
01 I/P1234567890
PUMP 3
PUMP 4
PUMP 5
key to
key to re-trace
S /E
ETTINGS XIT
key
00000 BSL10
33
SAVE SETTINGS?
P M
ROGRAM ODE
SAVE SETTINGS?
SETTINGS SAVED
01
BRIGHTWELL
E
NGLISH
B L S
RIGHTSTAR AUNDRY YSTEMS