RS Pro V7434 Hoja De Instrucciones página 8

V7434
25
26
A bench mounting, hand operated rack and pinion lever press offered
with punching, cutting and forming accessories (separately available)
to provide an invaluable service for sheet material working in workshop
and production environments. The press has a high quality carbon
steel frame capable of applying a constant pressure of up to 3,000 lbf
max. (1360 kgf) over the full stroke. The press and accessories are
very straightforward to set up and operate, this instruction leaflet
describes their range of suitable functions with sufficient detail for the
user to adapt the press to his own custom design tooling if required.
Basic Dimensions (mm)
Frame size length x width x height________________270 x 48 x 190
Overall width (including mounting brackets)__________________165
Maximum height (excluding handle)
Handle length ________________________________________560
Bench mounting (4 x 10 clear)
8
RS Stock No.
541-309
______________________335
________________150 x 94 centres
Setting of alignment
A. Centering point
RS stock no. 541-545
B. Back stop RS stock no. 541-551
C. Locking screw
D. Side stop RS stock no. 541-567
E. Locking screw
Einstellung von Ausrichtungshilfen
A. Zentrierspitze
B. Hinteranschlag 541-551
C.Verschluß-schraube
D.Seitenanschlag 541-567
E. Verschluß-schraube
Montaje de la alineación
A.Punto de centrado
Código RS 541-545
B.Parada posterior
Código RS 541-551
C.Tornillo de cierre
RS 541-567
D.Parada lateral Código
E.Tornillo de cierre
Alignment of workpiece against stops
Ausrichtung von Werkstück gegen Anschläge
Alineación de una pieza frente a las paradas
Alignement de la pièce contre les butées
Allineamento del pezzo ai fermi
Features
High strength frame.
Compact size.
Easily bench mounted.
Straightforward tool setting procedures.
Versatile range of accessories.
Adaptable for custom tooling.
Constant pressure over full stroke.
Specification
Ram diameter ______________________________________31.57
Maximum pressure at ram ____________________________1360kg
Depth of throat ________________________________________150
Throat clearance (daylight)________________________________83
Stroke length (stop fitted) ____________________________6 to 60
Max stroke length (stop removed) __________________________76
Punch and die fittings
Ram spigot hole 22mm deep x 18± 003⁄000 dia
Central die hole (through) 38.03± 005⁄000 dia
Dieholder fixing holes (4 x M8) __________________55 x 35 centres
Weight (nett) ______________________________________14.2kg
Réglage de l'alignement
A. Pointeau de centrage,
code commande RS 541-545
B. Butée arrière,code commande
RS 541-551
C. Vis de verrouillage
D. Butée latérale, code commande
RS 541-567
E .Vis de verrouillage
Allineamento
A. Punta di centraggio
Codice RS 541-545
B. Fermo posteriore
codice RS 541-551
C. Vite di fermo
D. Fermo laterale
codice RS 541-567
E. Vite di fermo