Distance Measurement - Leica RANGEMASTER CRF 1600-R Manual Del Usaurio

EN
RANGE MEASUREMENT
To measure the distance to an object, you must aim
directly at it. To do this, proceed as follows:
Press the main button 2. This switches on the
1.
device.
• The reticule appears.
When you release the main button, the reticule re-
mains lit for around another 6 seconds. If you hold it
down, the reticule remains lit continuously.
24
2. Aim at the object while the reticule is lit.
3. Press the main button again.
• a. The reticule disappears briefly during the
As long as the reticule remains lit, you can carry out
98
another measurement at any time by pressing the
main button.
The display shows:
– the distance to the object is less than 10 meters, or
– the range is exceeded, or
– the object is not sufficiently reflective.
When the display disappears, the Leica Rangemaster
CRF 1600-R shuts down automatically.
measurement.
b. The measured value is displayed.
-, if
- -