Maintenance And Cleaning - Stages cycling Power SPM1 Manual Del Usuario

Maintenance and cleaning

The only items of the power meter that can be serviced by the owner are the
battery, battery cover and o-ring. No other items are serviceable and no
attempt should be made to adjust or alter any other items.
When cleaning the power meter use only water dampened cloth to wipe off
dirt and debris. Never use any harsh cleaning chemicals that may damage
the plastic housing. Inspect the battery compartment to ensure the batter
contact is clean of any corrosion.
Never directly spray the power meter or battery door with high
pressure water. The water pressure from sprayers can reach thousands
of pounds per square inch and may force water past the o-ring
damaging the power meter electronics.
Firmware
Firmware is the programming that operates the power meter's computer.
The power meter has been designed to allow over-the-air (OTA) firmware
updates. Updated firmware may be developed and released by Stages
Cycling to provide added or improved functionality. Firmware updates
may be sent to the power meter by way of the Stages Cycling Utility App
for Apple® iOS devices using a Bluetooth Smart compatible (BLE 4.0) model
such as the iPhone® 4s, 5 or newer and iPad® 3, Mini or newer. At the time
of printing, Android™ Apps supporting Bluetooth OTA updates of the
power meter firmware are not yet available; however, these may be
developed and released at a later date. Please check our website at:
www.stagescycling.com/support-app for links to the available utility
Apps hosted in the App stores as well as instructions on how to utilize the
App for firmware update and other procedures.
10