JB Systems Lounge Laser DMX Manual De Instrucciones página 10

ENGLISH
 The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
 In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
 The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
 The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
 Clean with a soft cloth using normal glass cleaning products.
 Always dry the parts carefully.
 Clean the external optics at least once every 30 days.
 Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
Mains Input:
Fuse:
Power consumption:
Laser Power:
Laser radiation class:
Laser Safety Standard:
Safe ambient temperature:
LED Power
DMX in/out:
Weight:
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS
®
Every information is subject to change without prior notice
AC 100~240V, 50/60Hz
250V 1A slow blow (20mm glass)
15 Watt
40mW Green CW laser (λ = 532nm)
150mW Red CW laser (λ = 650nm)
3B
EN/IEC 60825-1 Ed2, 2007-03
10°C – 40°C
5W (blue – 455nm)
3pin XLR male/female
1,6kg
8/48
OPERATION MANUAL
LOUNGE LASER DMX