JB Systems Lounge Laser DMX Manual De Instrucciones página 7

ENGLISH
HOW TO SET UP AND CONTROL THE UNIT
 Regular breaks during operation are essential to maximize the life of this device as it is not designed for
continual use.
 Do not switch the unit on and off in short time intervals as this reduces the lamp life.
 Always unplug the unit when it is not used for a longer time. or before replacing the bulb or start servicing.
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 Important: Never look directly into the laser beam! Don't use the effect in the presence of persons
suffering from epilepsy.
SETUP MENU - OVERVIEW
LEGEND:
ArA: Automatic random play
SrA: Slow random play
Sou: Sound activated random play
Man: Manual settings play mode
1Ch/7Ch: DMX-working mode
SLA: Slave mode.
You can operate the unit in 5 ways:
1) "Sou" MUSIC CONTROLLED MODE:
The laser runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1 laser
is used (standalone) or when the laser is placed as the first (master) unit in a chain with several Lounge
lasers.
 Press the FUNC-button until the display shows "Sou"
 Press the ENTER-button to confirm your choice.
 Put on some music and adjust the MUSIC SENSITIVITY: press the UP/DOWN buttons to adapt the
sound level from 0 to 9 until the laser works nicely to the rhythm of the music.
You can connect several Lounge lasers together: just put the first unit of the chain in "Music mode" and all
other units in "Slave mode" to make them all work in perfect sync!
Note: When no music is detected, the laser output will be shut off (blackout).
2) "ArA" / "SrA" FULL AUTOMATIC MODE:
The laser automatically runs a preprogrammed sequence. Select this mode when only 1 laser is used
(standalone) or when the laser is placed as the first (master) unit in a chain with several Lounge lasers.
 Press the FUNC-button until the display shows "ArA" or "SrA"
 Press the ENTER-button to confirm your choice.
The laser automatically runs a preprogrammed sequence.
You can connect several Lounge lasers together. Please put the first unit of the chain in "Automatic mode"
and all other units in "Slave mode" to make them all work in perfect sync!
JB SYSTEMS
®
5/48
OPERATION MANUAL
LOUNGE LASER DMX