NSK S-Max pico Manual De Operación página 6

3. Connecting/Disconnecting Handpiece 3. Connecting/Disconnecting Handpiece
S-Max pico QD
(1) Connecting
1) Insert the Coupling into the Hose Connector.
2) Tighten the Hose Nut.
3) Pull the Connector Ring
4) Push into the handpiece into Coupling.
CAUTION
· Ensure connect "Coupling and Hose" or "Handpiece and Coupling" firmly.
· Do not pull the Connector Ring while the handpiece is under air pressure. It may jump the handpiece out from the connector because of the air
pressure.
(2) Disconnect
Slide back the Connector Ring as shown in Fig.2.
Connector Ring
Hose Nut
Handpiece
Fig. 2 Fig. 2
5