Hupfer SPTW-2/EBF Manual De Instrucciones página 62

Chapter 7
Page 30
General working principles for the handling of appliances made of "refined stainless steel":
§
Always keep the surface of appliances made from stainless steel clean and accessible to the air.
§
Use cleaning agents suitable for stainless steel. No bleaching and chloride-containing cleaning
agents should be used.
§
Remove layers of lime scale, grease, starch and egg-white daily by cleaning. Corrosion can occur
underneath these layers due to lack of air admission.
§
After each cleaning operation remove all cleaning agent residues by wiping thoroughly. Afterwards,
the surface should be thoroughly dried.
§
Do not bring parts made from stainless steel into contact with concentrated acids, seasonings, salts
etc. for longer than is absolutely necessary. Acid fumes which generate during cleaning of tiles also
promote the corrosion of "refined stainless steel".
§
Avoid damaging the surface of the stainless steel, particularly by metals other than stainless steel.
§
Residues of extraneous metals produce extremely small amounts of chemical elements which can
cause corrosion. In any case, contact with iron and steel should be avoided because that leads to ex-
traneous rust. If stainless steel comes into contact with iron (steel wool, steel particles from pipes, wa-
ter containing iron), this can be a trigger for corrosion. Therefore, for mechanical cleaning use exclu-
sively refined steel wool or brushes with natural, plastics or refined steel bristles. Steel wool or brush-
es with unalloyed steel lead to extraneous rust due to abrasion.
Food transport trolley
SPTW-2/EBF | SPTW-3/EBF | SPTW-2/EBF-S | SPTW-3/EBF-S | SPTW-2/EBF-K | SPTW-3/EBF-K
Cleaning and Care
Special Care Instructions
4330025_A1