Technical Characteristics - Mestra T1 Manual Del Usuario

♦ Connect the booth outlet tube to an exhauster, and adjust the pressure inside the booth via
the stoppers on the right-hand side.
♦ Do not use the bag filter supplied with the unit on a permanent basis: it is for short-term use
only in unforeseen or temporary circumstances.
♦ If the rubber gloves become damaged or torn, replace them immediately.
♦ Do not allow children or unskilled personnel to handle the unit.
♦ Use only guaranteed high-quality grinding media (we recommend MESTRA media). Low
quality media can be toxic if dust is inhaled.
♦ Connect the inside light to 230 V 50/60 Hz with earth.
♦ Ensure that the compressed air system used to power the unit is properly protected by at
least one pneumatic discharge valve.
♦ If leaks are detected in the compressed air system, consult your installer immediately.

TECHNICAL CHARACTERISTICS

T1
Height: 300 mm 345 mm 345 mm
Length: 380 mm 435mm
Width: 325 mm 360 mm 360 mm
Weight: 6.5 kg
T2 T3
435mm
8 kg 9.5 kg
English
11