Completing Installation; Programming With The Easy Base Unit - Gewiss Chorus GW 10 763 Manual De Usuario

INSTALLATION INSTRUCTIONS
Position the thermostat on the support base, as
seen in the figure below, and fix it in place using
the supplied screws.

Programming with the Easy base unit

Programming the thermostat through the Easy base unit (code GW 90 831).
The thermostat channel to be used in the function that is to be created can be selected
at choice:
• Press the , keys together for >5 seconds to enable the programming mode. Use
the keys to select the channel you wish to use, then press
corresponding channel will be highlighted in the channel list in the "Application
function" or "Application
Press the keys together to exit the programming mode.
• directly from the list of channels of the "Application
Edit function" menus.

Completing installation

Edit function" menu.
59
1
2
3
to confirm: the
New function" or "Application
E
N
G
L
I
S
H
New