Description Of The Memory Functions - WEBTEC HPM540 Manual De Instrucciones

13. Description of the memory functions
Configuring the measured value memory
DATA FORMAT
REC CONFIG
FAST MODE
V2.0/02.11
Description of the memory functions
During the recording interval
ACT
(for example, 50 ms), the current meas-
urement value (ACT) only will be written
to the measured value memory.
During the recording interval
MIN-MAX
(for example, 50 ms) one MIN and one
MAX value will be written to the meas-
ured value memory.
The selected recording time is auto-
2 000 PTS
matically divided into a fixed number of
recording intervals per channel.
Example:
10 min recording time = 600 s
Duration of recording interval =
600 s ÷ 2.000 = 300 ms
Definition of an individual recording
REC RATE
interval (for example, 5 ms).
Based on the settings (DATA FORMAT/
REC RATE), the measuring instrument
examines if the selected recording time
must be extended.
Example:
Recording time 100 h/conflict
recording time
ACT measured values only are saved
at a fixed recording interval of 0.5 ms
via IN1. All other inputs (INx) are not in
function.
127