Jungheinrich ETR 314 Manual De Instrucciones página 63

– Preparing for operation
– Step down on and press the dead man switch (18) and brake switch (17).
– Press the brake key (26) in the operator display to release the parking brake.
– (t)Turn the function switch (19) in the
direction of the arrow
– (o) 1 Move Multipilot (5) in the direction of
the arrow
(o) 2 Move Multipilot (5) in the direction of
the arrow
– The vehicle starts moving in the chosen
direction.
Qw W
The dead man switch (18) and the brake switch (17) keep the operator's feet
in place during travel. If the dead man switch (18) is not pressed, all the
electrical functions are taken out of operation with the exception of the
steering, the operator display and the horn. The vehicle coasts to a stop in
accordance with the "coasting brake" parameter. If the brake switch (17) is
not pressed, the service brake is used to stop the vehicle.
NOTICE The travel speed is controlled with the function switch (19) / Multipilot (5).
E 32
V
R
R
V
19
5
V
5
R