System Lay-Out; Technical Features - RIB RAPID N Serie Manual Del Usuario

SYSTEM LAY-OUT

280/11,2"x300/12"
- RAPID N barrier
- Photoelectric cells
- Galvanized column for P.E. cells
Parts to install according to EN 12453 standard
COMMAND TYPE
Hold-to-run operation
Impulsive - in sight
(e.g. push-button)
impulsive - out of sight (e.g. remote)
automatic
* a typical example are those doors which do not have access to any public way
A: Hold-to-run operation made by push-button ex: code ACG2013
B: Hold-to-run operation made by key selector ex: code ACG1010
C: Adjustable power of the motor or photocells to respect impact forces as indicated in Annex A
D: Safety strips and/or other additional devices to reduce the probability of contact with the door.
E: Devices installed in such a way that a person can not be touched by the door.
- Strip with Photoelectric cell
- Magnetic loop
USE OF THE SHUTTER
Skilled persons Skilled persons
(out of public area*) (public area)
A B
C or E C or E
C or E C and D, or E
C and D, or E C and D, or E
6000/236"

TECHNICAL FEATURES

Ambidextrous irreversibile operator endowed with a control panel, used for the
intesive movement of boom arms from 3 to 6 m long.
The cabinet of the operator is treated with cataphoresis and thermal spray
coating.
The barrier boom can be supplied as a single piece or, in the case high objects
may hinder its travel, you can require it in the articulated version, specifying the
height of this obstacle from the ground.
The barrier boom with RIB profile is constructed for being fitted with a photocell
strip.
N.B. You must make installation features comply with laws and standards in
force.
TECHNICAL
DATA
Max. boom lenght
Opening time
EEC Power supply
Motor capacity
Power absorbed
Capacitor
Max. torque
Power supply
2
Motor capacity
Power absorbed
Capacitor
Max. torque
Normative cycles 230V
Normative cycles 120V
Daily operations suggested
Not skilled persons
Service
Not possible
Guaranteed consecutive cycles
Lubrification
C and D, or E
Weight of electroreducer
C and D, or E
Working Temperature
C and D, or E
Protection IP
ASSEMBLING RAPID N
After you have cemented in the base plate where you want it, mount RAPID N
using the nuts provided and a no. 19 hexagonal wrench.
33
Measurements
in mm/inch
1
RAPID N
m/in 6/236"
s 6
230V~ 50Hz 220V~ 60Hz
W 242 285
A 1,07 1,31
µF
10
Nm/ftlb 155/144 141/104
120V~ 60Hz
W 186
A 2,07
µF 25
Nm/ftlb 105/77
n° 2400 - 6s/2s
n° 2400 - 6s/2s
n° 1500 for boom 3-4-5-6 m
% 100
n° 1500 for boom 3-4-5-6 m
SHELL OMALA S2 G100
kg 62
°C -10 ÷ +55
IP 54
G
B