Removing An Egc-Compatible Device - Oase InScenio Instrucciones De Uso

- EN -
How to proceed:
1. Tap to open the list with available OASE devices.
– When the list is opened, the InScenio EGC Controller automatically searches for connected EGC de-
vices. The EGC devices must be correctly connected to the EGC network and switched on so that the
InScenio EGC Controller can find the EGC devices. Found devices are displayed in colour in the list and
the message "Device found" is shown underneath the product name.
– To search for connected EGC devices again, tap
– EGC-compatible devices are marked with the EGC logo (Easy Garden Control) in the product image.
2. Select the device "ProfiClear Controller Upgrade" in the list.
– The device can only be added if InScenio EGC Controller has found the device in the EGC network.
– For information on the device, tap . If the following prompt is confirmed with "OK", the OASE homepage
with the relevant product information opens in your browser.
3. Tap to add the device.
– A message signals that the ProfiClear Controller must be assigned a ProfiClear Premium filter in the next
step.
4. In the list, select the ProfiClear Premium variant connected with the ProfiClear Controller.
– The ProfiClear Premium variants are marked in colour in the list.
– For information on the device, tap . If the following prompt is confirmed with "OK", the OASE homepage
with the relevant product information opens in your browser.
5. Tap to add the device.
– The teach-in of the ProfiClear Premium filter is complete and the filter is added to the device list.
6. To give the added device a name, switch to the device overview.
7. Select the desired device in the device overview and tap
– A dialogue field will open.
8. Enter the device name and confirm with "OK".
– The device name has been assigned.
7.2.3

Removing an EGC-compatible device

"My devices" screen
Variant 1
How to proceed:
1. Select the device to be deleted in the device list.
2. Tap .
3. Confirm the subsequent prompt with "OK".
– The device has been removed.
Variant 2
How to proceed:
1. Touch the line with the device you wish to delete, hold and pull to the left.
2. Touch "Delete".
– The device has been removed.
24
.
.
EGC0017