Introduction; Package Contents; Working; The Display - Vetus EC Manual De Manejo Y Instrucciones De Instalación

1

Introduction

This manual contains information about
the operation, calibration and installation
of the electronic compass 'EC'.
The following information can be read
from the display:
- Heading on electronic compass rose
- Heading on 7 segment display
- True North or Magnetic North
- Damping
- Variation
- Alignment
- Off course alarm
1.1 Package contents
- EC display instrument
- EC compass sensor with bracket
- 2 female 6-pole connectors
- 1 female 4-pole connectors
- Mounting seal
- 4 metal rings + M4 nuts
- Drill Template
2

Working

2.1 The display
1
2
3
SOLID STATE ELECTRONIC COMPASS
4
1 Electronic compass rose
2 Magnetic North indicator
3 Alarm indicator
4 Buttons
5 Geographical North indicator
6 7-segment heading display
Electronic Compass EC
2.2 Summary of operating
functions
The unit has four control buttons. These
buttons have the following functions:
press the
more times to change the back-
light intensity or when in a menu
this button works as a reset but-
ton.
press the
the menu.
Use
one of the menus and press
to enter the menu.
If you press the
more than 2 seconds you will exit
the menu.
course alarm' or when in a menu it
works as a button to select a menu
or change settings.
when in a menu it works as a but-
ton to select a menu or change
settings.
The function of a button is activated when
the button is released, both
buttons have an automatic repeat
function. The buttons have a timeout of 1
5
minute.
6
2.2.1 Button sound
On the release of a button you will hear a
key sound. This sound can be switched of
in the menu 'Key Sound' (ST4).
ENGLISH
button once or
button to access
/ keys to choose
button for
on/off setting for the 'off
select 'true' or 'mag' north,
100505.01
and
15