Swing-N-Slide Chesapeake Manual Del Usaurio página 29

Fig. 18
Washer
2-1/2'' screws
Loc-Nut
2-1/2'' screw
S. A-Frame Assembly cont.
1. Align EZ-Frame Bracket with carriage bolts on Swing Beam as shown in (Fig. 15).
2. Attach A-Frame beam to Swing Beam using (2) washers and (2) Loc-Nuts and 2 screws as shown in (Fig. 18).
3. Tighten Loc-Nut. Repeat on other bracket.
29