Swing-N-Slide Chesapeake Manual Del Usaurio página 45

washer
1-3/4'' Panhead screw
Fig. 38a
metal strap
Anchor-It
stake
Fig. 38
11"
Anchor-It
Flat Washer
1-1/2"
lag bolt
P. Safety Handles.
1. Mount safety handles in the ladder and
climbing wall openings approximately 11''
above the deck surface (Fig. 38).
S. Anchor-It Installation.
Instructions for Anchoring Swing•N•Slide
Activity Centers
1. Determine the final location of your activity
center.
2. Place the Anchor-It stakes adjacent to the base
and near the corners of your activity center (at
the bottom of the legs on swing sets) and twist
the auger-style stakes into the ground until only
the loop is exposed.
3. Place the metal strap through the loop of the
Anchor-It stake and secure it to the unit with a
lag screw and washer as illustrated to the right.
Note: Attach the strap to the unit with as little
play as possible using whatever holes in the
strap that work best.
45