Storage For Long Periods; Installation - Circutor SVGm IP54 Manual De Instrucciones

3.3.- STORAGE FOR LONG PERIODS

If the device is not installed after receipt, the following recommendations must be observed to keep
the device in a good state:
Keep the device in a dry atmosphere and at a temperature of between -20ºC and 50ºC.
Avoid exposure to direct sunlight.
Keep the device in its original packaging.
If the static generator is stored for a long time disconnected from the mains, a specific process must
be applied to restore the internal dielectric layers of the DC bus capacitors.
mendations for starting the device, according to the length of its storage period.

3.4.- INSTALLATION

The Cabinet-type SVGm IP54 models are free-standing cabinets with 4 bearing supports on the floor.
86
Table 5: Start-up process, according to storage time.
Storage time
< 1 year
No special treatment required.
Connect the SVGm IP54 to the mains at least one hour be-
> 1 year fore starting up the device. Power the device and leave it in
STOP mode
The mounting surface must be solid, support the device's weight and be level.
The cabinet must never be welded to the floor using arc welding, as this may destroy
the electronic components.
Table 5
Process
SVGm IP54
shows the recom-
Instruction Manual