Marq COLORMAX P18 Guia Del Usuario página 6

Linking
When using multiple Colormax P18 fixtures, you can link ("daisy-chain") them so that each fixture
sends DMX data to the next one. This helps reduce clutter in your cabling and save you setup time.
DMX
Use a standard 3-pin DMX cable to connect the DMX Out of one fixture to the DMX In of another.
Your connected DMX controller will send its data to the fixtures in sequence. All fixtures in this chain
will receive all DMX data.
According to the DMX standard, you can link up to 25 fixtures with up to 6.6 feet (2 meters) between
each fixture, without amplification. Keep in mind the number of channels you are using as well as the
starting address.
DMX Controller Colormax P18 Colormax P18 Colormax P18
6