Hamilton Beach Stack & Snap Manual Del Usuario página 8

How to Use Reversible Shredding Disc
Laceration Hazard.
w WARNING
• Handle disc carefully; it is very sharp. Make sure unit is
switched to OFF ( ) and is unplugged.
• Always use food pusher to feed food into the chute. Never push
food through chute with hands or other objects.
1. Place bowl on base with handle
facing to the right. Disc is labeled
FINE SHRED on one side and
COARSE SHRED on the other side.
Carefully place shredding disc straight
down onto motor shaft with desired
side facing UP.
2. Place lid on bowl. Raise locking arm
up and over bowl and snap into
place. Plug into outlet.
3. Place food into food chute and use
food pusher. Do not fill bowl above
MAX FILL line.
4. Select Low (LO) speed by moving
left switch down. NOTE: This food
processor will start in the speed it was last used.
8
5. Move ON ( ) switch up to turn on food processor or press
switch down to PULSE for instant on and off control.
6. When finished, switch to OFF ( ) and unplug. Push locking
arm back to unlock lid and lower arm onto counter.
7. Always remove lid before removing bowl to avoid possible
damage to the appliance.
NOTES:
• Check to make sure no other blades are in the bottom of the
work bowl.
• Bowl scraper cannot be used with the reversible shredding
disc.
• LO speed is recommended for slicing and shredding.