SHERCO 125 4T Manual De Propietario página 45

fig.6 CountDown function
It is possible to modify the different figures in the counter, starting with
the largest figure and moving successively to the lesser one; depending on
the data selected (shown flashing with f=1Hz, Duty=50%), a brief pressure
on the button will decrease the figure by one, while a longer pressure will
enable the selection of a different parameter. Once the adjustment has
been finished, normal operation mode is activated by pressing the button
for about 3 seconds while the lesser figure is selected. If the figure counts
down to 000.0, the system will Re-initialize the value at 999.9.
Note 1 Once into the adjustment menu, the system will return to normal
operation mode if 20 seconds pass without the button being pressed.
Note 2 Once into the adjustment menu, if the bike starts to move (speed>0),
the system will automatically return to normal operation mode.
Sequence displayed: from 999.9 to 000.0
The information is not saved to memory
fig.7 CountDown adjustment
45