Orbea R10 El Manual Del Propietario página 7

FIT PAD
Different thicknesses pads are provided for a good
fit. Fit Pads are held in place by a hook and loop style
fastener. Try any combination of the various pads
provided until the helmetfits firmly and comfortably. All
fit adjustments must be made with the helmet in the
proper position. Failure to do this will result in a poor fit.
A poor fit will allow the helmet to move out of position
or come off in an accident. For proper pad placement,
refer to Figure3. For proper position, please refer to
Figure 8.
Fig.3