Brentwood Appliances MC-109BK Instrucciones De Operación Y Seguridad página 4

To Assemble
CAUTION: Handle the Blades with care, as they are extremely sharp.
1. Before using the product for the first time, thoroughly wash the Cover, Bowl, and Blade
Assembly in hot, soapy water and dry thoroughly.
2. Make sure it is unplugged from the outlet and place the Base on a flat, level, stable surface.
3. Place the column in the center of the Bowl over the Shaft in the Base, aligning the tabs in
the bottom edges of the Bowl with the indentations in the edges of the Base.
4. Turn the Bowl clockwise until the tabs on the Bowl slide under the tabs on the Base, as shown.
5. While holding the Blade Assembly by the top, place it onto the column in the Bowl and
turn the Assembly until it rests about one half inch above the bottom of the Bowl.
6. Place the Cover onto the Bowl, ensuring that the peg in the Cover is inserted into the top of the
Blade and the small arrow on the top of the Cover points away from the top of the Base.
7. Turn the Cover until the arrow meets the arrow on the top of the Base, as shown.
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This
is a result of the heating element chemical reaction. It quickly goes away.
Using Your Mini Food Chopper:
WARNING: Avoid contact with moving parts.
WARNING: Always assemble the product completely before plugging it into an outlet.
1. Cut solid ingredients into small pieces, as needed. NOTE: Hard vegetables, such as raw
carrots, may require splitting and/or quartering for proper product operation.
2. Turn the Cover counterclockwise and remove it from the Bowl. Place up to 1½ cups of
solid or ¾ cup of liquid ingredients into the Bowl.
CAUTION: To prevent product/property damage, do not overfill the Bowl.
3. Reattach the Cover securely onto the Bowl by aligning the arrow on the Cover with the arrow
on the Base. NOTE: The product will not operate until the Cover is securely locked into place.
4. Plug the product into a standard 110-120 volt AC electrical outlet, and then press and
hold the On/Pulse Button.
5. When the contents are at the desired consistency, release the On/Pulse Button, and then
allow the Blades to stop completely.
6. Unplug the product from the electrical outlet and then remove the Cover. Turn the Bowl
counterclockwise to release the tabs on the edges of the Bowl from the tabs on the Base.
Remove the Blade Assembly before pouring contents from the Bowl.
WARNING: Always unplug the product when it is not in use or is left unattended.
Cleaning Your Mini Food Chopper:
WARNING: Always unplug the product and allow it to cool before cleaning or storing it.
CAUTION: Use caution when attaching or detaching the Blade Assembly, as the Blades are
extremely sharp.
• Clean the product after each use. Wash the Cover, Bowl, and Blade Assembly in hot, soapy
water and dry thoroughly. Clean the exterior of the Base by wiping it with a soft, damp cloth.
CAUTION: Do not use abrasive cleaners or scouring pads to clean any part of the product.
• Store the product in a cool, dry place.
WARNING: Do not immerse the Base in water or other liquids.
4