Oxygen Plates; Removing & Inserting; Clean - Ozoneair PLUS Manual De Usuario

0 8
OXYGEN PL ATE S
The product uses oxygen plates to produce ozone.
These have a life span that ranges from 2000
to 4000 hours depending on the amount of dust
and moisture in the air when the product is used.
The oxygen plates should be cleaned after every
500 hours of use. Once used for 2000 hours,
it is recommended to replace them for best
performance.
NOTE – After 2000 hours, "replace plate" lights up on
the screen. When ordering new oxygen plates, instruc-
tions for how to restore this is included.
WARNING! – Never remove the oxygen plates while
the product is plugged into a wall outlet. Risk of
electric shock.
E N
14
Removing & Inserting
Unlock by sliding
1
locking pins
outwards on both
sides.
Drag plats straight
2
outwards or push
them inside.
Lock by sliding
3
locking pins
inwards on both
sides.

Clean

Apply hot water
1
and cleaning
agent.
Scrub with a soft
2
brush to remove
dirt.
Leave for air drying
3
at least 15 minutes
before inserting.
E N
15