Fender PDP-1 Instrucciones De Functionamiento página 3

This symbol warns the user of dangerous voltage
levels localized within the enclosure.
This symbol advises the user to read all accompanying
literature for safe operation of the unit.
∆ Read, retain, and follow all instructions. Heed all warnings.
∆ WARNING:
To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with the
installation instructions.
∆ WARNING: Flying loudspeakers above crowds is dangerous
and should only be undertaken by experienced and insured
riggers.
∆ WARNING: The length of the useful life of these cabinets
will depend in substantial part upon how they are treated in
use. The user of this cabinet must periodically have this
cabinet inspected to ensure that continued use has not
weakened the cabinet's structure.
∆ WARNING: To prevent damage, fire or shock hazard, do not
expose this unit to rain or moisture.
∆ CAUTION: To prevent electrical shock, match wide blade of
plug to wide slot of outlet and fully insert.
∆ This product should be located away from heat sources such
as radiators, heat registers, or other products that produce
heat.
∆ This product should be serviced by qualified service
personnel when: objects have fallen, or liquid has been
spilled onto the product; or the product has been exposed to
rain; or the product does not appear to operate normally or
exhibits a marked change in performance; or the product has
been dropped, or the enclosure damaged.
∆ Do not drip nor splash liquids, nor place liquid filled
containers on the unit.
∆ CAUTION: No user serviceable parts inside, refer servicing
to qualified personnel only.
∆ Fender
® loudspeaker systems are capable of producing very
high sound pressure levels which may cause temporary or
permanent hearing damage. Use care when setting and
adjusting volume levels during use.
∆ Only connect the power supply cord to an earth grounded AC
receptacle in accordance with the voltage and frequency
ratings listed under INPUT POWER on the supplied adapter
for this product.
∆ Unplug the power supply cord before cleaning the unit
exterior (use a damp cloth only). Wait until the unit is
completely dry before reconnecting it to power.
∆ During operation: Maintain at least 1 inch (2.54 cm) of
unobstructed air space around the unit to allow for proper
ventilation and cooling of the unit; do not block any vents in
the unit chassis.
∆ This product may be equipped with a polarized plug (one
blade wider than the other). This is a safety feature. If you
are unable to insert the plug into the outlet, contact an
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of this plug.
∆ Protect the power supply cord from being pinched or
abraded.
I m p o r t a n t S a f e t y I n s t r u c t i o n s
∆ The power supply cord of this product should be unplugged
General Precautions:
∆ Always carefully route speaker cables to avoid any chance
∆ Due to the high acoustical energy generated by the
∆ Do not insert or drop anything into the Speaker enclosure's
∆ Do not stack PDP speakers.
∆ Use this product only with the supplied wall-mounting
from the outlet when left unused for a long period of time, or
during electrical storms.
that someone could trip over them. Tripping over the cables
attached to the speaker can cause the speaker to be
knocked over, potentially leading to personal injury and
damaged equipment.
speakers, they may have a tendency to move across smooth,
polished, or slippery surfaces. Care should be taken to
ensure the speakers do not fall off of the edge of such
surfaces (i.e. stages, tables, etc.).
bass ports (located on either side of the high frequency
horn).
brackets.