auna Connect System S Manual Del Usuario página 58

EN
58
DAB Display Modes
Every time you press the INFO/MENU button on the remote control or press
and hold the INFO/MENU button on the unit, the display will show the
following display modes:
DLS: Programme Type – Ensemble/Frequency – Signal error/Strength – Bit
rate/Codec/Channels – Date
DLS (Dynamic Label Segment): This is a scrolling message giving real-time
information, e.g. song titles, news headlines, etc.
Programme Type: This describes the "style" or "genre" of the programme
that is being broadcast.
Ensemble Name/Frequency: This display the name of the multiplex that
contains the station you are listening to and the frequency. A
multiplex is a collection of radio stations that are bundled and transmitted
on one frequency. There arenational and local multiplexes. Local ones
contain stations that are specific to that area.
Signal Error/ Signal Strength: The error is shown as a number. If the number
is 0, it means the signal received is error free and the signal strength is
strong. If the error rate is high, it is recommended to reposition the radio
aerial or reposition the unit. The display will show a slide bar to indicate the
signal strength, the stronger the signal, the longer the bar will be from left
to right.
Bit Rate / Codec / Channels: The display will show the digital audio bit rate
being received with additional information about the audio
codec and channel configuration.
Date: This displays the current date provided automatically by the
broadcaster.
Prune Invalid
You may remove all unavailable stations from the list.
1. During DAB mode, press the MENU button and press the  / buttons
to select Prune invalid and then press the ENTER button to confirm.
2. Press the  / buttons to select YES and press the ENTER button to
confirm, or select NO to cancel.
DRC (Dynamic Range Compression)
If you are listening to music with high dynamic range in a noisy
environment, you may wish to compress the audio dynamic range.