Kramp GOPART FGP455239GP Manual Del Usuario página 4

CONTROLS AND FEATURES IDENTIFICATION
Read this owner's manual before operating the equipment. Familiarize yourself
with the location and function of the controls and features. Save this manual for
future reference.
UK
1. Handle – Pushes and moves the spreader easily.
2. Flow Control – Controls the flow of material being spread.
3. Hopper – Do not exceed rated load capacity 125lb.
4. Tires / Wheel – Do not exceed recommended rated 30PSI.
5. Impeller – Evenly distributes material.
6. Support Leg – Stabilizes load and spreader.
CAUTION
Read and follow all instructions for assembly and operation. Failure to properly
assemble this equipment could result in serious injury to the user or bystanders,
or cause equipment damage.
PUSH SPREADER COMPONENT PARTS AND ASSEMBLY.
Take all parts out of the shipping crate and inspect components to ensure there
are no missing pieces before starting to assemble the push spreader follow steps 1
through 5.
TOOLS REQUIRED
• Pliers (2 Each)
• 8mm Wrenches (2 Each)
• 10mm Wrenches (2 Each)
• 13mm Wrench
• 14mm Wrench
4
1.
6.
2.
3.
5.
4.