Specifications; Troubleshooting - Royal Sovereign RBC-4500 Manual Del Propietário

Auto/Manual Start Mode:
The machine is preset to automatically start counting bills once placed into the hopper. To change to the manual start mode
press the MNL key, insert bills into the hopper and press ENTER/RESET key.

SPECIFICATIONS

Model
Power
Power consumption
Surroundings temperature of usage
Counting speed
Note-feeding size
Display
Cubage
Net Weight
TROUBLE ShOOTING
Issue
Display shows
" DOUBLE or CHAIN"
Bills not feeding properly
Main motor and/or vane motor don't run
Display shows "0" but is not counting bills
single-phase 100~240V 50/60Hz(±5%)
<50W
32~104°F / 0~40°C
900pcs/min, 1200pcs/min and 1400pcs/min.
4.3˝ × 2.0˝ ~ 7.3˝ × 3.5˝ / 110 × 50~185 × 90(mm)
Full dot matrix LCD
10.4˝ × 9.5˝ × 9.6˝ / 263 × 241 × 245(mm)
10.1 lbs / 4.6kg
Reason
The tension adjustment is too loose
The tension adjustment is too tight
Hopper plate sensor is not working
correctly
Counting sensor is not working correctly
10
RBC-4500
Trouble shooting
Adjust the note thickness
counterclockwise( toward '-')
Adjust the note thickness clockwise
(toward '+')
Clean out hopper with soft brush or
compressed air to clear out dust.
Otherwise unit may need to be serviced
Clean the counting sensor by blowing
compressed air throughout stacker and
vane area of unit. Otherwise unit may need
to be serviced.