Features∙ ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6; Automatic Self-Test - Royal Sovereign RBC-4500 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURES
Front Loading
The sophisticated front loading system provides easy access to hopper, allows larger hopper capacity, and is more durable
than a back loading system.

Automatic Self-Test

The machine will automatically perform a self-test when it is turned on. If there is a problem, the preset display will show an
error code. (See ERROR CODE DISPLAYS.)
Auto and Manual Start Modes
The machine is preset to automatically start counting bills once placed into the hopper. To change to the manual start mode,
press MNL, insert the bills into the hopper, and press Enter/Reset. Press MNL again to return to auto mode.
Magnetic Counterfeit Detection
If the magnetic detector does not find the presence of magnetic components that are standard in authentic bills, the
machine will stop counting to allow removal of the counterfeit bill and display the error code on the preset display. To use
magnetic counterfeit detection press menu key, 2 for Level, 2 for MG, then select number key 1-5, 1 for lowest, 5 for highest
then press Enter/Reset.
UV Counterfeit Detection
Counterfeit bills often use white or bleached paper, which will glow under ultraviolet light. To use ultraviolet counterfeit
detection press menu key, 2 for Level, 1 for UV, then select number key 1-5, 1 for lowest, 5 for highest then press Enter/
Reset. When the UV detector finds a counterfeit bill, the machine will stop counting to allow removal of the counterfeit bill
and display the error code on the preset display.
Dimension Detection
The dimension detector measures the width of the center of each bill by using infrared light. If the detector finds an odd
sized bill, the machine will stop counting to allow removal of the bill and display the error code on the preset display. To use
dimension counterfeit detection press menu key, 2 for Level, 3 for DD, then select number key 1-5, 1 for lowest, 5 for
highest, then press Enter/Reset.
6

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido