Royal Sovereign RBC-4500 Manual Del Propietário página 7

Double Set
The double set detector measures the thickness of each bill. If the detector finds an odd sized bill, the machine will stop
counting to allow removal of the bill and display the error code on the preset display. To use double set counterfeit detection
press menu key, 2 for Level, 4 for Double, then select number key 1-5, 1 for lowest, 5 for highest then press Enter/Reset.
Batch Counting Modes
The machine is preset to common counting mode, which automatically counts all bills placed into the hopper. To count bills in
batches, press BATCH. Batching is preset to 100 bills. To change batch amount, use the keypad to enter a batch number
between 1 and 999. Press Enter/Reset to save the setting. Press BATCH key again to clear.
Add Mode
The ADD mode displays cumulative total of all bills counted. To turn ADD mode on, press ADD. Press ADD key again to clear.
Value Counting
The machine will total the number of bills by denomination and total value by denomination as well as a grand total.
Each denomination must be counted separately. To operate press ADD key. Then on the keypad press the denomination to
be counted ($1 - $100). After denomination is counted press the next denomination to be counted and continue until all
denominations needed to be counted is complete. Then press DISPLAY key and you can view total number of bills and
values of each denomination along with a grand total.
Variable Speed
The machine has three speed settings. 900, 1200, 1400 bills per minute. Use lower speed settings for older or worn bills.
To set the speed setting press menu key, 1 for Speed, then select number key 1-3.
Connect to printer
Plug printer cable into printer interface on back of unit and turn printer on. The interface communication format is 8 data
bits, and white parity bit, one stop bit. Baud rate(optional): 4800bps, 9600bps, 14400bps, 19200bps, 28800bps,
57600bps. Factory defaults is 9600bps. Press " " for 2 seconds to print.
7
RBC-4500