Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CDT-05 PROFESSIONAL HYBRID TURNTABLE
INTRODUCTION:
Congratulations on your purchase of a Gemini CDT-05 Professional
Hybrid Turntable. The CDT-05 is the latest advancement in DJ technolo-
gy, combining the control of a fully functional high torque turntable with
the versatility and convenience of Compact Discs. In addition, the CDT-05
has the ability to play both Vinyl records and Compact Discs simultaneous-
ly, for an endless array of performance possibilities. With the proper maine-
nance, the CDT-05 will provide years of reliable and solid performance.
FEATURES:
- Audio CD, CD-R, CD-RW, and MP3 compatible
- Removable, virtually unskippable straight tone arm system
- High-Torque Direct Driven platter (3.6 kg/cm) provides full control over
CD playback
- Independent audio outputs for turntable and CD sections
- 3-position CD/TT mode switch allows simultaneous playback of both CD
and vinyl
- 3 DSP effects: Filter, Echo, and Phase with variable parameters
- Reverse switch
- Motor ON/OFF switch
- 3 Hot-Startable cue points with easy to operate memo button
- Master cue w/ hot-start feature
- Key Lock (Master Tempo)
- Anti-Shock Protection using RAM buffer memory
- Slot Loading mechanism with LED illumination
- Single auto-cue/continuous play modes
- Seamless looping with reloop/stutter & loop editing
- Pitch bend via platter or buttons
- Three mode time selection
- Frame accurate search & cue
- Large 4-line backlit dot matrix display
- Sturdy aluminum platter with finger grooves
- Variable Pitch control with ranges of 4%, 8% , 16%, and 50%
- Soft touch buttons with bright LEDs
CAUTIONS:
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit. There are
NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qual-
ified Gemini Sound Products service technician. In the USA: If you experi-
ence problems with this unit, please call 1 (732) 738-9003 for Gemini
Customer Service. Do not attempt to return this equipment to your dealer.
3. Do not expose this unit to direct sunlight or to a heat source such as a
radiator or stove. When operating, ensure that the unit has adequate ven-
tilation.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or
other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton
and packaging. This will reduce the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CON-
TROLS OR SWITCHES.
CDT-05 QUICK START INSTRUCTIONS:
1. Set up the unit according to the Connections/Setup and Tonearm Setup
section. Make sure to first review all of the warnings and cautions before
proceeding.
2. To play a CD, first insert a disc into the CD transport located on the front
right hand side of the unit, and switch the O
PERATION
'CD.' Make sure the M
(21) button is lit, and press the
O
/O
OTOR
N
FF
P
/P
B
(16) to begin playback. You will have full access to
LAY
AUSE
UTTON
manipulating the music via the S
C
CRATCH
ONTROL
same fashion as a turntable. You will also be able to apply digital effects to
the CD portion of the unit, including cue points, DSP effects, pitch,
reverse, etc. For detailed instructions on how each feature applies to CD
playback, see the Functions section.
3. To play a Vinyl record, place the specialized Slipmat on top of the
S
C
V
P
(3), so that the mat is flush with the S
CRATCH
ONTROL
INYL
LATE
A
(4). Place a record on top of the Slipmat, and switch the O
NCHOR
(44) to 'TT.' Make sure the M
M
S
ODE
WITCH
OTOR
and press the P
(16) to begin playback. This might seem
/P
B
LAY
AUSE
UTTON
unconventional at first, but you will find the performance to be flawless.
While in TT Mode, any manipulation of the vinyl record (or the platter)
will not be applied to the CD. In order to preserve vinyl's unique sound
qualities as much as possible, the audio from the Turntable portion is not
sent through the DSP effects section.
4. In order to play both CD and Vinyl simultaneously, you must switch the
(44) to 'MIX.' In Mix Mode, the S
O
M
S
PERATION
ODE
WITCH
V
P
(3) will not control the CD. The purpose of this is so that a DJ
INYL
LATE
may play a beat off of CD, while scratching over it with a Vinyl record. Use
the M
O
/O
(21) button to start and stop the platter for Vinyl play-
OTOR
N
FF
back, and use the P
(16) to start and stop playback of the
/P
B
LAY
AUSE
UTTON
CD portion. Note that the independent audio outputs on the back of the
CDT-05 allow you to connect the CD and Vinyl portion of the unit to sep-
arate channels of your audio mixer. In Mix Mode, the P
will control the pitch of the Turntable portion, and the P
(10) will control the pitch of the CD portion. Because the unit shares many
functions between CD, Turntable, and Mix, it is best to read over the
Functions section to get a grasp of how each function behaves in each
mode.
5. Read the rest of the manual! Everyone (even the author of this manu-
al) wants to start playing right away, and that is understandable - especial-
ly with such an exciting and innovative product as the CDT-05. However,
the function of it does differ from conventional products, and this manual
<5>
is written to address those differences and put them into the perspective
and context of a performing DJ. You might even discover functions you
never knew existed! We know that you want to dive right in and get start-
ed, but keep the manual at an arm's length, just in case you get stuck or
need clarification.
CONNECTIONS / SETUP:
1. P
OWER
OFF
. Make sure the switch is in the 'O
O
FF
ing any connections.
ON
2. AC I
unit, is the connector which accepts the P
plied) used to power the unit.
(44) to
M
S
ODE
WITCH
V
P
(3), in the
INYL
LATE
to using the unit, make sure that this switch reflects the voltage supplied in
your locality.
4. CD A
audio signal from the CD player portion of the unit and should be
connected to an appropriate line-level input on your audio mixer.
CRATCH
5. P
PERATION
HONO
(21) button is lit,
O
/O
N
FF
signal from the turntable portion of the unit and should be con-
nected to an appropriate phono-level input on your audio mixer.
6. G
T
ROUND
ERMINAL
tional ground terminal, as most turntables have. The reason for this is that
the CDT-05's turntable section is grounded internally and does not require
the use of a ground wire. If you are experiencing any type of ground hum
from the turntable section, verify that your CDT-05 is powered using the
C
CRATCH
ONTROL
same outlet as your mixer and the rest of your audio equipment.
7. D
IGITAL
DIGI TAL
player portion of the unit in IEC-958 (S/PDIF) format, and can be
OUT
connectd to any device with the appropriate S/PDIF input, such as
a digital mixer, computer, or outboard D/A converter. Using this
particular output requires specialized equipment and may not apply to
C
(9)
ITCH
ONTROL
your setup.
B
B
ITCH
END
UTTONS
8. R
ELAY
two CDT-05s together, so that when one unit finishes playing, the
opposite unit automatically starts playback. For normal use, leave
RE LAY
this jack disconnected.
: The P
(33) turns the unit O
S
S
WITCH
OWER
WITCH
' position prior to mak-
FF
: The AC I
(31), located on the rear of the
NLET
NLET
OWER
3. V
S
S
: The V
OLTAGE
ELECTOR
WITCH
OLTAGE
(32) allows the unit to operate on either 115 or
S
WITCH
230 volt configurations, for worldwide operation. Prior
(37): This set of outputs carries the
RCA O
UDIO
UTPUTS
RCA O
(38): This set of outputs carries the audio
UTPUTS
: As you may notice, the CDT-05 does not have a tradi-
O
(36): This output carries audio from the CD
UTPUT
(35): This jack makes it possible to connect
S
J
TART
ACK
9. L
P
S
F
OW
ROFILE OR
TANDARD
EET
feet may be changed depending on the height
you wish to achieve. With the L
OW
or
N
C
(sup-
ORD
S
ELECTOR
(45): The
P
ROFILE
Publicidad
Tabla de contenido
