Transport, Storage And Disposal; 10.1 Venting The Appliance; 10.2 Transporting The Appliance - melitta CAFFEO PASSIONE OT Instrucciones De Operación

Problem
Loud grinder noise.
Brewing unit cannot
be inserted after
removing.
System error appears
on the display.
10

Transport, storage and disposal

10.1 Venting the appliance

We recommend venting the appliance when it is not used for a long period,
prior to transport and when there is a risk of frost.
During venting, residual water is removed from the appliance.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
3. Navigate to the System > Venting menu.
4. Select Start using the arrow buttons and confirm with "menu/ok".
5. Follow the further instructions on the display.
» The appliance switches off.

10.2 Transporting the appliance

ATTENTION
Freezing residual water can damage the appliance.
Prevent the appliance from being exposed to temperatures below 0 °C.
ƒ
Information
Transport the appliance in the original packaging. This avoids damage in
transit.
Cause Action
Foreign object in the ƒ
grinder.
Handle for the
ƒ
locking mechanism
of the brewing unit
is not in the correct
position.
Drive is not in the
ƒ
correct position.
Software problem.
ƒ
ƒ
Transport, storage and disposal
Contact the hotline.
Check that the handle for the
locking mechanism is correctly
engaged (see section 8.3 one
page 35).
Press and hold the "Coffee
strength" button. Also press the
ON/OFF button. The appliance
initialises. Release buttons again.
Switch the appliance off and
on again (see section 4.1 one
page 14).
Contact the hotline.
43