Camera Overview - Lorex LNZ3522B Manual De Instrucciones

4 Camera Overview

1. Dome Cover
2. Ethernet Port: Connect the camera to an NVR or PoE switch on
your network using the included Ethernet cable.
3. 12V DC Power: If not using PoE, connect the camera to a 12V
DC power source (not included). Power adapters for this camera
are available for purchase on
#: CVA4902).
4. Lens: Camera lens.
5. Microphone: Built-in microphone.
6. GND Port: The pre-inserted screw grounds the camera.
7. Reset Button Compartment: Open using a Phillips screwdriver
to reveal the reset button. Press and hold for 4 seconds to reset
camera settings.
#; r. 1.0/19290/19290; en-US
www.lorextechnology.com (model
5